Mode Identification - PocketWizard Plus II Manuel Du Propriétaire

> If FPS/Short Pulse mode is engaged for a remote or receiving Plus II radio
triggering a camera's motor drive, undesirable operation may occur (no
triggers, inconsistent triggering). Set the TRANSMIT MODE switch to LOCAL
or BOTH for proper remote camera or relay operation.
> To determine if your Plus II is capable of High FPS/Short Pulse Mode,
turn the radio on normally and set the TRANSMIT MODE switch to
REMOTE. If the STATUS LEDs blink faster after a moment, then you have
a Plus II that is capable of High FPS/Short Pulse Mode.
- Plus II radios that are not capable of this mode will work with ones
that are.
- Only a receiving Plus II radio connected to a fast flash that requires this
mode needs to have it.
- Plus II radios used as transmitters, or used as receivers to trigger slower
flashes or camera motor drives, do not need to have this mode.
-The STATUS LED blinking pattern for High FPS/Short Pulse Mode (a
receive only function) and Transmit Only Mode look the same. These two
modes of operation are not able to be engaged at the same time.

Mode identification:

- If you hold TEST as you power the radio on, then it is in Transmit Only
Mode. If the Transmit Mode switch is set to REMOTE, then only the flashes
connected to remote PocketWizards will trigger (normal operation for this
switch). The flash connected to the camera's Plus II Transceiver will not
trigger. See pages 7 and 10 of the Plus II manual for more information.
If you do not hold TEST when you power on the radio, and the TRANSMIT
MODE switch is set to REMOTE, then it is in High FPS / Short Pulse Mode.
© 2009 LPA Design, Inc. All rights reserved. Product features and specifications
are subject to change without notice. PocketWizard, ControlTL, MiniTT1, FlexTT5,
HyperSync, Plus II and MultiMAX are either trademarks or registered trademarks
of LPA Design, Inc. All other trademarks contained herein are the property of their
respective owners.
This product is covered under a warranty. For more information on this warranty
and to register your product, please go to www.PocketWizard.com/support.
US Patent: 5,359,375 and Patents Pending
LPF499 v1.0
www.PocketWizard.com
info@PocketWizard.com