Additional Safety Instructions; Layout; Depicted Components; Symbols - Mafell A18 Traduction De La Notice D'emploi Originale

bend if allowed to turn freely (without contact with
the workpiece); this can lead to injuries.
- Do not apply excessive pressure and only
apply pressure in the longitudinal direction to
the drill bit. Drill bits can bend and thus break or
lead to a loss of control and injuries.

3.3 Additional safety instructions

- Ensure that the machine is switched off when you
push in the rechargeable battery.
- Remove the rechargeable batteries from the
machine before carrying out any setting, retooling,
maintenance or cleaning tasks.
- Dust originating from materials such as leaded
paint, some types of wood, minerals and metal can
be harmful to health. Touching or inhaling these
dusts can cause allergic reactions and/or
respiratory disorders in the user or persons staying
in the vicinity.
- As far as possible, make use of a dust extraction
system.
- Provide for good ventilation of the workplace.
- It is recommended to wear a respirator mask with
filter class P2.
- Observe the regulations valid in your country for
the materials to be machined.
- Secure the workpiece against shifting, e. g. by
means of fastening devices.
- LED light (Fig. 1, 7): Do not directly look at the
LED radiation with optical instruments.
4

Layout

4.1 Depicted components

(see Fig. 1-6)
(1) Exchangeable attachment (chuck)
(2) Gear change slide (drilling, impact screw driving
only ASB ...)
(3) Gear change slide - first or second gear
(4) Sense of rotation selector switch, double sided
(5) Bit adapter, double sided
(6) Belt clip, can be used on both sides
(7) LED light
(8) Button - capacity display
(9) Rechargeable battery
(10) Capacity and signal display
(11) Setting wheel – torque pre-selection, impulse
function
(12) Switch trigger
(13) Additional handle
(14) Bubble level
(15) Circular level
(16) Unlocking mechanism rechargeable battery
(17) Locking ring
(18) Clamping arm
(19) Adjusting screw

4.2 Symbols

Nm
5

Operation

5.1 Rechargeable battery, capacity and signal
display
(see Fig. 1)
•
Charge the rechargeable battery prior to use.
•
Recharge the rechargeable battery in case of
loss of power.
•
Press the button (8) to query the charge
condition of the rechargeable battery. The
capacity can be read off the LED lights (10).
•
If a LED light (10) flashes, the rechargeable
battery is almost empty. Recharge the
rechargeable battery.
•
The optimum storage temperature is between
10 °C and 30 °C.
-20-
Movement direction
First gear
Second gear
Screwing
Drilling
Without torque control
Impulse function
Impact drilling
Torque