Dyna-Glo DGU732BDE Manuel D'instructions page 7

ASSEMBLY INSTRUCTIONS
3.
Remove the 2 pre-assembled M5 x 12 mm screws
(AA) from the smoker cabinet assembly (A). Insert
the 2 screws into the rear handle (B) and into the
threaded holes in the smoker cabinet assembly (A).
Tighten the screws.
Hardware Used
M5 x 12 mm
AA
Screw
4.
Place the grease tray (J) on the bottom of the
smoker cabinet assembly (A) as shown.
x 2
4
11
3
A
A
J
B
AA