ASROCK K7VT4A Pro Guide D'installation page 13

Chassis Speaker Connector
(4-pin SPEAKER 1)
(see p.2 item 17)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.2 item 15)
CPU Fan Connector
(3-pin CPU_FAN1)
(see p.2 item 2)
ATX Power Connector
(20-pin ATXPWR1)
(see p.2 item 6)
Power LED Connector
(3-pin PWR_LED1)
(see p.2 item14)
Game Connector
(15-pin GAME1)
(see p.2 item 26)
2.6 2.6 2.6 2.6 Serial A 2.6 Serial A Serial A Serial AT T T T T A (SA Serial A A (SA A (SA A (SA A (SAT T T T T A) Hard Disks Installation
This motherboard adopts VIA VT8237 southbridge chipset that supports Serial
ATA (SATA) hard disks. You may install SATA hard disks on this motherboard for
internal storage devices. This section will guide you to install the SATA hard disks.
STEP 1: Install the SATA hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATA
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA hard disk.
ASRock K7VT4A Pro Motherboard
Please connect the chassis
speaker to this connector.
Please connect a chassis fan
cable to this connector and
match the black wire to the
ground pin.
Please connect a CPU fan cable
to this connector and match the
black wire to the ground pin.
Please connect an ATX power
supply to this connector.
Please connect a 3-pin power
LED cable to this connector.
Connect a Game cable to
connector if the Game port
bracket is installed.
A) Hard Disks Installation A) Hard Disks Installation A) Hard Disks Installation A) Hard Disks Installation
this
1 3 1 3 1 3
1 3 1 3