Maintenance - Southland SCS2052.1 Manuel D'utilisation

Maintenance

• Save these instructions
WARNING
spark plug wire from the spark plug and place it where it cannot come in contact with
plug to prevent accidental starting and serious injury.
WARNING
machine or result in injury.
CAUTION
and remain hot after engine has stopped. To avoid severe burns on contact, stay away
from these areas.
IMPORTANT: The warranty on this chipper shredder does not cover items that have
been subjected to operator abuse or negligence. To receive full value from the warranty,
the operator must maintain the chipper shredder as instructed in this manual, and only
use genuine replacement parts.
A
Maintenance Table
The following table lists required periodic maintenance.
Clean Debris from Machine
Check fasteners for tightness
Refer to the separate Engine Owner's Manual for all engine Maintenance.
1-Check fasteners for tightness after the first 2 hours of initial use.
B
Lubrication
• Refer to the separate Engine Owner's Manual for lubrication schedule and
instructions for engine lubrication.
C
Chipper Shedder Care
• Clean the chipper shredder thoroughly before and after each use.
• Wash bag periodically with water. Allow to dry thoroughly away from direct sunlight.
• If the impeller housing becomes clogged, remove and clean as instructed in the
Cleaning The Impeller Housing paragraph.
NOTICE
Cleaning chipper shredder with a forceful spray of water is not
recommended as it could contaminate the fuel system.
Questions? Call Toll Free at 1-800-737-2112
Before performing any maintenance, turn engine off and remove the
Use only GENUINE replacement parts. Other parts may damage the
Muffler and other engine parts become extremely hot during operation
BEFORE AFTER
EACH USE EVERY 10
HOURS OF
USE
√
√
1
ENG - 20
Copyright © 2015 MAT Engine Technologies, LLC
AFTER BEFORE
EACH USE STORAGE
√ √
√