Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Assembly
• Save these instructions
Read and follow the assembly instructions. Do not discard any parts or materials until
the machine is assembled.
WARNING
adjusting or making repairs, always disconnect spark plug wire and place wire where it
cannot come in contact with plug.
WARNING
assembling the chipper shredder.
WARNING
before each use and while inflating tires; see the tire sidewall for the correct tire pressure.
IMPORTANT: Air tanks, compressors and similar equipment used to inflate tires can
fill small tires similar to these very rapidly. Adjust pressure regulator on air supply
to no more than the rating of the tire pressure. Add air in small increments and
frequently use the tire gauge to prevent over inflation. DO NOT over inflate.
Carton Contents
Chipper Shredder (1)
Operator's Manuals (1)
Quick Start Guide (1)
Engine Operator's Manual (1)
Engine Oil [20 oz. (590 mL)] (1)
Questions? Call Toll Free at 1-800-737-2112
In order to prevent ac cidental starting when setting up, transporting,
Always wear ANSI compliant safety glasses with side shields while
Risk of bursting. Use a tire pressure gauge to check the tires pressure
If you need assistance or find any parts
missing, CALL TOLL FREE: 1-800–737-2112
Debris Bag (1)
Chute deflector assembly with sleeves
and fastener (1)
Tow bar and assembly hardware
(if equipped)
ENG - 13
Copyright © 2015 MAT Engine Technologies, LLC

Publicité

Table des Matières
loading

Table des Matières