Monthly Maintenance - Tennant T3 Opérateur Manuel Et Liste Des Piéces

Masquer les pouces Voir aussi pour T3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
7. Check the condition of the squeegee blade wiping
edge (Figure 43). Rotate blade if worn.
(See SQUEEGEE BLADE REPLACEMENT)
FIG. 43
8. Clean the machine with an all purpose cleaner and
damp cloth (Figure 44).
FOR SAFETY: When cleaning machine, do not
power spray or hose off machine. Electrical
malfunction may occur.
FIG. 44
9. Inspect the condition of the scrub head skirt,
replace if worn or damaged (Figure 45).
FIG. 45
10. FaST Model: Connect the FaST--PAK supply hose
to the storage plug when not in use (Figure 46).
Remove any dried concentrate from the hose
connector by soaking it in warm water.
18
Home
Find... Go To..
FIG. 46
11. Recharge the batteries after a total of 30 minutes
of use or more (Figure 47). (See CHARGING
BATTERIES).
FIG. 47
MONTHLY MAINTENANCE (Every 80 hours of use)
1. Clean the battery tops to prevent corrosion (See
BATTERY MAINTENANCE).
2. Check for loose battery cable connections.
3. Inspect and clean the recovery tank cover seal
(Figure 48). Replace if damaged.
FIG. 48
4. Lubricate all pivot points and rollers with silicone
spray then coat with a water resistant grease to
maintain smooth operation.
5. Check the machine for loose nuts and bolts.
Tennant T3 (10- -04)

Publicité

Table des Matières
loading

Table des Matières