Operating The Brush Bar On / Off Switch; Resetting The Overload Protector - Samsung SU12F70 Serie Manuel De L'utilisateur

OPERATING THE BRUSH BAR ON / OFF SWITCH

1
• Push the power On/Off switch, and then push the brush bar On/Off switch.
When the vacuum is in the upright position, the brush bar does not work.
CAUTION

RESETTING THE OVERLOAD PROTECTOR

• The overload protector shuts off the
brush motor if the brush bar becomes
obstructed.
To reset the overload protector, use a pen
tip to press the reset switch.
12_ Operating cleaner
2 3