Niko 10-880-01 Mode D'emploi page 25

10-880-01 / 10-881-01
Please read the complete manual before carrying out the installation and activating the system.
1. DESCRIPTION
This flush type door loudspeaker (10-880-01) with extension (10-881-01) of the Access Control Standard
range is always part of a system with one or more internal units and a power supply. More information on
how the product is integrated into a complete system can be found in the technical catalogue.
These components can be mounted behind a panel with bell push buttons. Up to 16 bell push buttons can
be connected to the flush type door loudspeaker. Both a microphone and a loudspeaker are built in. The
extension can be connected to the flush type loudspeaker using the cable provided. The extension allows
the connection of up to 32 additional bell push buttons. All programming is stored on a removable
EEPROM. Communication is always via the flush type door loudspeaker (10-880-01).
2. PARTS
Basic parts of flush type door loudspeaker 10-880-01
Loudspeaker
possible upper side
device
programming key
double side adhesive film
removable terminals
for bell push buttons
EN
serial number
for extension 10-881-01
connector
Service unit
yellow and green status LED
connector
potentiometers for
volume ring tone and voice
removable
microphone
removable
EEPROM
memory
read connector
EEPROM 10-88X
removable
screw terminals for bus
25