Reservoir System; Select™ Sps™ Ultrasonic Scaler - DENTSPLY Cavitron Select SPS Instructions D'utilisation

Masquer les pouces Voir aussi pour Cavitron Select SPS:

Instructions d'utilisation (82 pages)

Table des Matières

Les langues disponibles

Section 7: Installation Instructions for Cavitron

7.5 Power Cord/Power Connection

• Verify the Power Control knob is set to the OFF position

before proceeding.

• Plug the detachable AC cord into the back of the Medically

Approved Power Supply.

• Plug the power supply outlet into the back of the Cavitron

Select™ Reservoir Pump.

• he system should not be postioned such that access to the

power input and AC power cord are limited.

• he Cavitron System should not be positioned such that

access to the power input and AC power cords are limited.

7.6 Foot Control Cable Assembly

Connection

Align the Foot Control plug with the receptacle on the back

of the Cavitron

Select™ Reservoir Pump and push it in until

irmly seated.

ENGLISH • 8

Select Scaler with

Cavitron

Select™ SPS™ Reservoir System cont'd.

7.7 Lavage Control Detachable

Handpiece Cable Assembly Connection

• Plug the Handpiece outlet into the receptacle on the back of

the Cavitron

Select™ Reservoir Pump.

• Holding the Handpiece Cable Assembly seat male connector

into appropriate female connector.

• Once seated, snap male connector into female connector by

pushing on the end of the male connector.

• Rotate Lavage Control on the handpiece to middle setting.

Turn on the on/of switch (power adjustment). his

energizes the system and the ultrasonic unit is ready for

operation.

Section 8: Cavitron

Select™ SPS™ Ultrasonic Scaler

Description

8.1 System Controls: Cavitron

Select™ SPS™ Ultrasonic Scaler

Power & Boost Indicator Light

Green when system is

switched ON. Orange when

"Boost" Mode is activated.

8.2 System Controls: Cavitron

Select™ SPS™ Ultrasonic Scaler with Cavitron