Beurer BM 44 Mode D'emploi page 21

• Risk of explosion! Never throw batteries into a fire.
• Do not charge or short-circuit batteries.
• If the device is not to be used for a long period, take the
batteries out of the battery compartment.
• Use identical or equivalent battery types only.
• Always replace all batteries at the same time.
• Do not use rechargeable batteries.
• Do not disassemble, split or crush the batteries.
Repair and disposal
• Batteries do not belong in domestic refuse. Used batteries
should be disposed of at the collection points provided.
• Never open the instrument. If these instructions are not
heeded, the warranty will be null and void.
• Never attempt to repair the instrument or adjust it yourself.
We can no longer guarantee perfect functioning if you do.
• Repairs may only be performed by Customer Service or au-
thorized dealers. However, always check the batteries and
replace them if necessary prior to making any complaint.
• For environmental reasons, do not dispose of the device
in the household waste at the end of its useful life.
Dispose of the device at a suitable local collection
or recycling point. Dispose of the device in
accordance with EC Directive – WEEE (Waste
Electrical and Electronic Equipment). If you have any
questions, please contact the local authorities responsible
for waste disposal.
Notes on electromagnetic compatibility
• The device is suitable for use in all environments listed
in these instructions for use, including domestic environ-
ments.
• The use of the device may be limited in the presence of
electromagnetic disturbances. This could result in issues
such as error messages or the failure of the display/device.
• Avoid using this device directly next to other devices or
stacked on top of other devices, as this could lead to faulty
operation. If, however, it is necessary to use the device in
the manner stated, this device as well as the other devices
must be monitored to ensure they are working properly.
• The use of accessories other than those specified or pro-
vided by the manufacturer of this device can lead to an
increase in electromagnetic emissions or a decrease in the
device's electromagnetic immunity; this can result in faulty
operation.
• Failure to comply with the above can impair the perfor-
mance of the device.
21