Checks To Perform Before And After Use; Break In Procedure - Sherco 50 SE-SM Manuel Du Propriétaire

n CHECKS TO PERFORM BEFORE AND AFTER USE
For safe riding and a long life for the vehicle it is advisable to:
1. Check all fluid levels.
1
Check that the brakes are working pro-
2
perly and check the brake pads for wear
( p.79-81).
☛
Check the pressure, the general condition
3
and the tread depth of the pneumatic
tires ( p.85).
☛
Check the spokes for proper tension.
4
Check the chain adjustment (
5
n BREAK IN PROCEDURE
The break in period is about 500 km, during this period it is advisable to:
- Avoid driving at a constant speed (without varying the speed).
- By varying the engine speed, the internal components will wear in properly in the Least
amount of time.
- Avoid using the vehicle with the throttle open more than ¾ of the way.
WARNING
• After the first 500 km, the transmission oil must be changed.
• After the first off-road trip, be sure to check all the bolts.
Check the setting and the correct functio-
6
ning of all the flexible control cables.
Check all bolts for proper tightness.
7
8
all the lights (headlight, taillight, stop light,
turn signals) make sure that the horn
works properly.
Wash the vehicle thoroughly after off-road
9
use (
p.86).
☛
Check the operation and the function of
p.88).
☛
71