Installation Requirements; Boat Horsepower Rating; Mounting Outboard Motor; Remote Control Requirements - Yamaha Motor VF150 Serie Manuel De L'utilisateur

Table des Matières

Les langues disponibles

Min. pump octane number (PON):

Min. research octane number (RON):

Recommended engine oil:

YAMALUBE 4M FC-W or 4-stroke

outboard motor oil

Recommended engine oil grade 1:

SAE 10W-30/10W-40/5W-30

API SE/SF/SG/SH/SJ/SL

Engine oil quantity (without oil filter

replacement):

4.3 L (4.55 US qt, 3.78 Imp.qt)

Engine oil quantity (with oil filter

replacement):

4.5 L (4.76 US qt, 3.96 Imp.qt)

Lubrication system:

Wet sump

Recommended gear oil:

Yamalube Marine Gearcase Lube HD or

Hypoid gear oil

Recommended gear oil grade:

SAE 90 API GL-4 / SAE 80W API GL-5 /

SAE 90 API GL-5

Gear oil quantity:

0.980 L (1.036 US qt, 0.862 Imp.qt)

Tightening torque:

Spark plug:

28 Nm (2.86 kgf-m, 20.7 ft-lb)

Propeller nut:

54 Nm (5.51 kgf-m, 39.8 ft-lb)

Engine oil drain bolt:

27 Nm (2.75 kgf-m, 19.9 ft-lb)

Engine oil filter:

18 Nm (1.84 kgf-m, 13.3 ft-lb)

Specifications and requirements

EMU33556

EMU33565

Boat horsepower rating

EWM01561

Overpowering a boat can cause severe in-

stability.

Before installing the outboard motor(s), con-

firm that the total horsepower of your out-

board motor(s) does not exceed the boats

maximum horsepower rating. See the boat's

capacity plate or contact the manufacturer.

EMU40491

Mounting outboard motor

EWM02501

 Improper mounting of the outboard mo-

tor could result in hazardous conditions

such as poor handling, loss of control,

or fire hazards.

 Because the outboard motor is very

heavy, special equipment and training is

required to mount it safely.

Your dealer or other person experienced in

proper rigging should mount the outboard

motor using correct equipment and complete

rigging instructions. For further information,

see page 48.

EMU33582

Remote control requirements

EWM01581

 If the engine starts in gear, the boat can

move suddenly and unexpectedly, pos-

sibly causing a collision or throwing

passengers overboard.

 If the engine ever starts in gear, the

start-in-gear protection device is not

working correctly and you should dis-

continue using the outboard. Contact

your Yamaha dealer.