Charging The Battery; Changing The Battery - WEBTEC HPM4000 Mode D'emploi

Hardware version / scope of delivery / updates

charging the battery

cautIOn
This instrument can be charged using the USB port on your PC. However a PC delivers less power and it will take much
longer for the battery to charge.
If sensors are connected to the instrument, the current consumption of the sensors may be greater than the charging current, in which
case the battery will continue to discharge. Thus we recommend using the power supply or car charger (available separately) for
charging quickly and when using for continual measurement processes.

changing the battery

Contact your sales representative for more information if you need to switch batteries.
30
Charging time on the PC: > 7 hours
Charging time from power supply:
CAN version: approx. 7 hours
Analogue version: approx. 3.5 hours
V1.0/02/12