Airwell PAC BTE UI 4 Manuel D'utilisation page 54

7 - CONTROL
Refrigeration board parametres update (installer use)
Certain USB pen drive brands may not be detected.
Access reserved for technical assistance personnel during start-up and
Material required for the update:
PC with the pari.csv file required for the update process
USB pen drive (empty)
After connecting the USB pen drive to the PC, delete any files saved on
the pen drive.
Copy in the root of the USB pen drive the file of the parameters related to
the Serial number of the internal unit
NB: The parameters must be downloaded from the portal through
the serial number of the internal unit
With the unit powered and in OFF mode, connect the pen drive to the
USB port of the hydro board
1
Select System
Confirm
4
2
Select Update
Confirm
parametres
5
3
6
54