Optoma DC554 Manuel Utilisateur page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Connect to a microscope
Connect to a microscope enables you to examine microscopic objects
on a big screen.
1. Adjust the microscope and focus objects.
2. Choose an appropriate microscope adapter.
3. Microscope adapter accessories are applicable to Ø28mm,Ø31mm,
Ø33mm, and Ø34mm eyepieces.
For eyepieces of about Ø33mm and Ø34mm, only a microscope adaptor with Ø28 or
Ø34mm label should be installed.
For a Ø28mm eyepiece, insert the Ø28mm adapter into the microscope adapter.
For a Ø31mm eyepiece, insert the Ø31mm adapter into the microscope adapter.
Ø33 Ø34 mm
4. Mount the microscope adapter onto the Lens.
5. Switch the focus mode to Macro. Press MENU (
(
) -->select Macro or press Macro button (
controller.
6. Connect the lens with microscope adapter to the microscope.
If the image is not clear. Please adjust the focus of microcope.
Press the AF button (
fine-tune the focus.
Ø28 mm
Ø33 Ø34 mm
) or use the manual focus button on remote control to
15
Ø31 mm
Ø33 Ø34 mm
)--> select Focus
)(
) on remote

Publicité

Table des Matières
loading

Table des Matières