Battery Charger; Checking Battery Capacity; Safety Notes And Precautions - GreenWorks 29717 Mode D'emploi

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
leak under extreme usage or temperature
conditions. If the outer seal is broken and
the leakage gets on your skin:
– Use soap
immediately.
– Neutralize with lemon juice, vinegar, or
other mild acid.
■ If leakage gets in your eyes, follow
instructions above and seek medical
attention.
■ Please check prior use, if output voltage
and current of the battery charger is
suitable for the charging battery pack.

CHECKING BATTERY CAPACITY

Press the battery capacity indicator (BCI)
button. The lights will illuminate according to
the batteries capacity level. See chart below
BCI
BUTTON
Lights
4 Green Lights The battery is at full capacity
3 Green Lights The battery is at 70% capacity
2 Green Lights The battery is at 45% capacity
The battery is at 10% capacity and
1 Green Light
requires charging soon
The battery is under 10% capacity and
Lights go out
requires charging immediately

SAFETY NOTES AND PRECAUTIONS

1. Do not disassemble the battery.
2. Keep away from the children.
3. Do not expose the battery to water or salt
water, battery should be stored in a cool
and dry location and should place the
battery in cool and dry environment.
4. Do not place the battery in high-temperature
locations, such as near a fire, heater, etc.
5. Do not reverse the positive terminal and
the negative terminal of the battery.
6. Do not connect the positive terminal and
the negative terminal of the battery to each
other with any metal objects.
7. Do not knock, strike or step on the battery.
English (Original Instructions)
and water to
LIGHT
METRE
BATTERY
METRE
Capacity
8. Do not solder directly onto the battery and
pierce the battery with nails or other edge
tools.
wash
9. In the event that the battery leaks and the
fluid gets into one's eye, do not rub the
eye. Rinse well with water. Immediately
discontinue use of the battery, if, while
using the battery emits an unusual smell,
feels hot, changes color, changes shape,
or appears abnormal in any other way.

BATTERY CHARGER

SPECIFICATIONS
40V Charger: 2910907
Input: 100-240V
Output: 40V
40V Charger: 29417 (VDE plug), 29447
(BS plug)
Input: 100-240V
Output: 40V
40V Charger: 2924107
Input: 220-240V
Output: 40V
■ DO NOT probe the charger with conductive
materials.
■ DO NOT allow liquid inside the charger.
■ DO NOT try to use the charger for any
other purpose than what is presented in
this manual.
■ Unplug the charger before cleaning and
when there is no battery pack in the
charger.
■ Do not try to connect two chargers
together.
■ Do not use the charger in the circumstances
that the output Polarity does not match the
load polarity.
■ For indoor use only.
■ The cover may under no circumstances
be opened. If the cover is damaged, then
the charger may no longer be used.
■ Do
3
50-60Hz, 1.9A Max
2.2A
50-60Hz, 1.9A Max
2.2A
50-60Hz, 1A
4A
not recharge non-rechargeable