Safeguards
Please read through this Installation Guide carefully before installing the product. Keep the Installation Guide
for further reference.
CAUTION!
•
When transporting the Axis product, use the original packaging or equivalent to prevent damage to the
product.
•
Store the Axis product in a dry and ventilated environment.
•
Only use handtools when installing the Axis product, the use of electrical tools or excessive force could
cause damage to the product.
•
Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.
•
Use only accessories that comply with technical specification of the product. These can be provided by Axis
or a third party.
•
Use only spare parts provided by or recommended by Axis.
•
Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for service matters.
IMPORTANT!
•
This Axis product must be used in compliance with local laws and regulations.
•
To use this Axis product outdoors, it must be installed in an approved outdoor housing.
Battery replacement
This Axis product uses a 3.0V BR2330A Lithium battery as the power supply for its internal real-time clock (RTC).
Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects the
operation of the RTC, causing it to reset at every power-up. A log message will appear when the battery needs
replacing. The battery should not be replaced unless required!
If the battery does need replacing, please contact www.axis.com/techsup for assistance.
•
Danger of Explosion if battery is incorrectly replaced.
•
Replace only with the same or equivalent battery, as recommended by the manufacturer.
•
Dispose of used batteries according to the manufacturer's instructions.