General Operation - Dentsply Sirona inLab Speedcure Manuel D'instructions

GENERAL OPERATION

FUNCTION KEY DESCRIPTIONS
ESC
ESC: Aborts changes, exits menus and clears errors on the screen.
CURSOR DOWN: Moves cursor on menu - down.
PROG: To view process parameters.
CURSOR UP: Moves cursor on menu - up.
START/STOP: START or STOP the selected process. Press once to confirm the process name, lamps used and
cycle time. Press again to start the process.
LIFT (UP/DOWN): Raise and lower the work platform.
DISPLAY ON/OFF: Turns display ON & OFF. Unit is in standby when "OFF."
DISPLAY ON/OFF DOES NOT DISCONNECT ELECTRICAL POWER. BEFORE SERVICING, FIRST
!
SWITCH THE POWER TO THE OFF POSITION AT THE REAR OF THE UNIT. THEN UNPLUG THE UNIT
FROM THE ELECTRICAL SOURCE.
CARD READER: Used to load new material programs.
CURSOR PROG
DOWN
CURSOR START/
UP
4
LIFT
STOP (UP/DOWN)
CARD
READER
DISPLAY
ON/OFF