Korona 45051 Manuel D'instructions page 23

Tip: Before switching on the appliance, prepare all ingredients
in advance in bite size portions and arrange them in bowls or
on a platter, in order for everyone to serve themselves.
1. Place the raclette grill in the middle of the table.
2. Make sure that the grill plate (1) and stone plate (2) are
properly itted onto the support (10) and that the smooth
side of the stone plate (2) is facing upwards.
3. Apply some oil on the grill plate (1) and the raclette pans (3).
4. Connect the appliance to a properly installed and easily
accessible socket.
5. Switch the appliance on by turning (clockwise direction) the
temperature control switch (7) to the highest level. Heat the
appliance up for approx. 10 minutes. The indicator light (6)
lights up.
Attention: The stone plate (2) needs approx. 20 – 30 minutes
to heat up.
6. After this heating up process, adjust the temperature by
sliding the temperature control switch (7) to your desired level.
The integrated thermostat will keep the preset temperature
at a constant level. As soon as the respective temperature is
reached the indicator light (6) goes out.
Attention: The temperature control (7) is continuously variable.
7. Fill the raclette pans (3) according to your taste only with
cheese or other foods/trimmings and place them in the
appliance. Remove the pans (3) as soon as the cheese has
melted or the other food is done according to your liking.
Instruction Manual
ENGLISH
23