Jusb3~4: Usb 2.0 Connectors; Jled1: Rgb Led Connector - MSI X99A Présentation Rapide

JUSB3~4: USB 2.0 Connectors

These connectors allow you to connect USB 2.0 ports on the front panel.
Important
Note that the VCC and Ground pins must be connected correctly to avoid possible
y
damage.
In order to recharge your iPad,iPhone and iPod through USB ports, please install
y
MSI SUPER CHARGER utility.
®

JLED1: RGB LED connector

This connector allows you to connect the RGB LED strip.
Important
This connector supports 5050 RGB multi-color LED strips (12V/G/R/B) with the
y
maximum power rating of 3A (12V). Note that the length of the strip shall be no
longer than 2 meters, or the LED brightness would become weak.
Always turn off the power supply and unplug the power cord from the power outlet
y
before installing or removing the RGB LED strip.
Please use the LED Effect of GAMING APP to adjust, calibrate and control the LED
y
light.
30
Overview of Components
1 VCC
3 USB0-
5 USB0+
7 Ground
9 No Pin
1 +12V
3 R
1
2 10
1 9
2 VCC
4 USB1-
6 USB1+
8 Ground
10 NC
1
2 G
4 B