Rewinding The Existing Reel - MTD ET 1000 Mode D'emploi

n
Entanglement with foreign matter
n
Normal line fatigue
n
Attempting to cut thick weeds
n
Forcing the line into walls or
fenceposts
5. M
AINTENANCE AND REPAIR INSTRUCTIONS
I
NSTALLING A NEW TRIMMING LINE
The trimming line may be replaced by two
methods - rewinding the existing reel or
installing a prewound reel.
R E R
EWINDING THE XISTING
To rewind the existing reel you must:
n
Check for the correct line size.
n
Remove the inner reel and spring.
n
Wind the reel with the new line.
n
Reinstall the existing reel and spring.
T
HE CORRECT LINE TO USE
Use a dual line reel with Ø 2,00 mm.
R
EMOVING THE EXISTING REEL
n
Unscrew the Bump Knob
counterclockwise (
n
Remove the inner reel
n
Use a clean cloth to clean the inside of
N
the outer spool (
n
Check the indexing teeth on the reel and
N
spool for wear (
necessary, replace the reel and spool.
W
INDING THE EXISTING REEL
n
Insert the ends of new trimming line into
the inner reel holes
n
Loop the line into two equal lengths
before inserting it into the holes.
n
Wind the line, in even and tight layers
N
( F . 15), onto the reel, and in the
IG
direction indicated.
n
Push the ends of the line into the
N
slots( F . 16).
IG
R
EINSTALLING THE REEL
n
Insert the ends of the line through the
eyelets in the outer spool
n
Grasp the ends and pull firmly to release
the line from the slots in the spool.
n
Install the Bump Knob clockwise
10).
Line installation is now complete.
I
NSTALLING A PREWOUND REEL
n
Use the same instructions as the existing
reel:
n
The Correct Line to Use;
n
Removing the Existing Reel;
n
Reinstalling the Reel.
C /
LEANING STORAGE
n
Do not block the air vents.
n
Do not use strong detergents on the
plastic housing or handle.
n
Moisture can cause a shock hazard.
Wipe off moisture with a soft cloth.
EEL
N
F . 10).
IG
N
( F . 11).
IG
F . 12).
IG
F . 13). If
IG
N
( F . 14).
IG
N
( F . 17).
IG
N
( F .
IG
n
Clean the unit thoroughly before storing.
Hang the unit by the handle loop and
store it in a dry, well-ventilated area, out
of the reach of children.
ET 1000
3