Sun Microsystems Sun Blade 1000 Guide D'utilisation page 39

Restoring the Preinstalled Software
Your system comes preconfigured with the Solaris operating environment and other
preinstalled software. However, if you should replace your hard drive for any
reason, the replacement drive does not come preconfigured with the Solaris
operating environment or the other preinstalled software.
Therefore, you should make and keep a full backup of the operating environment,
which can be used to restore your system if it is ever needed. Instructions for
backing up your operating environment are included in the preinstalled Solaris
System Administration Guide AnswerBook2.
You can also restore some of the software that is preinstalled on your disk from the
CDs included in the appropriate version of the Solaris Media Kit. This media kit
contains some of the same software that is preinstalled on your system, with the
exception of the Java software. However, you can download these products from the
web sites listed in their respective sections in this document (also note that some
software products, such as Netscape, offer different versions than those in the media
kit, from their respective web sites).
To restore your hard drive from the Solaris Media Kit CDs, take the following steps:
1. Get the backup media, the Solaris Media Kit.
You might already have this kit if you ordered it with your system. If you did not
order the kit with your system, contact your Sun sales representative and ask to
order the Solaris Media Kit for your language and Solaris version.
2. Follow the installation instructions in the Start Here document that comes with
the kit.
You can install the Solaris operating environment and as much of the additional
software as you want.
3. To restore the system hardware documentation, reinstall it from the Sun Blade
1000 Hardware Documentation CD (704-6233) that is included with your system.
Use the instructions in the CD insert document Sun Blade 1000 Hardware
Documentation (804-6233).
en-23