2 SAFETY WARNINGS
Warnings
WARNING!
The Manufacturer declines all responsibilities if the precautions below are not taken.
The accomplishments concerning working environment safety and health regulations indicated by the current
laws (Dir. 2003/10/CE, Dir. 2002/44/CE and Legislative Decree no. 81/2008) have to be carried out either by the
end-user or by the employer: supplying the adequate personal protective equipment, informing about working
risks, health surveillance, etc....
The over-exposure to the vibrations may cause neurovascular lesions to people suffering from circulatory dis-
orders. In case of symptoms which could be referred to over-exposure, contact a specialist. These symptoms
can be torpor, loss of sensitivity, sharp pains, itching, strength reduction or loss, complexion discoloration or
structural modifications of its surface. This usually happens to one's hands, wrists and fingers.
2.1.1
Results of the tests made according to the Laws
1) ELECTROMAGNETIC COMPATIBILITY LEVEL
The equipment complies with the EMC 2014/30/EU electromagnetic compatibility directive.
General warnings
WARNING!
Do not use the tool indoor or in case of potentially explosive environment.
WARNING!
The tool can be only used by an operator who has been well trained and has attended a course about the
work safety rules.
2.2.1
Intended use of the tool
•
This tool has been designed to cut and to prune orchards, vineyards, citrus and olive groves and in general any
kind of plant.
•
The product is intended for non-intensive use only.
•
Use the tool just for the aims indicated in par. "Product description". Any other kind of use may cause injuries.
•
Use the tool only from the ground, working in a stable and safe position.
•
Do not use the tool when you are in an unstable position or off balance, on slipping surfaces (i.e. hills or wet grass)
or wherever there is no possibility of maintaining a stable balance (i.e. steep slopes).
•
Avoid working in bad weather conditions, such as in case of fog, rain, strong wind, hail storm, snow or ice.
2.2.2
Rules for the user's duties and behaviour
•
Do not operate, service or repair the equipment if you are under the influence of alcohol and/or drugs which could
impair your alertness or co-ordination.
•
Only well trained and qualified personnel - who have read the use and maintenance manual carefully - are allowed
to use the tool. The safety course must be administered by the employer.
•
Entrust or lend the tool only to people who are familiar with the instructions for use or trained by personnel authorized
by the employer.
•
The operator is the only responsible for injuries caused to other people or for damages caused to their properties.
Page. 24
Use and maintenance manual – Translation of
original Instruction.: 00, Date 30/08/2021