Twin-Star International 23MM0925 Instructions De Montage page 6

Locate Left Back Panel (I), Right Back
12.
Panel (P) and Center Back Panel (R),
attach to the back of the completed
assembly from step 11. Use a Phillips
Head screw driver, tighten screws (Q1)
through the pre-drilled holes in the Back
Panels to the completed assembly.
Connect the Right Front Door (K) to the
13.
Right Side Panel (F) with the hinge
pre-installed on Right Front Door (K), then
use a Phillips head screwdriver to tighten
the Screw (Q2) through the pre-drilled
holes.
REPEAT WITH LEFT FRONT DOOR
(J) ON OPPOSITE SIDE.
14. Attach the Knob (V) to the Left Front Door
(J) and Right Front Door (K), use the bolts
attached through the pre-drilled holes in the
doors. Then use a Phillips Head Screwdriver
to tighten the bolts.
E-5
Screw
Q1
R
P
Right
Back
Panel
Left
Front
Door
J
R
I
Left
Back
Panel
Q2
Q2
K
Right
Front
Door V
Knob
(with bolt)