Twin-Star International 23MM0925 Instructions De Montage page 5

9. Insert one Wood Dowel (N) into each of
pre-drilled holes. Push the Right Side
Panel (F), Left Side Panel (E) and Support
Divider (T) snug to completed assembly
from step 8. Attach the three Panels using
Bolts (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
10. Insert one Wood Dowel (N) into each of
the pre-drilled holes on the Assembly
from step 9. Then locate Mantel/Top (G)
and lay finished side up on top of
completed assembly. From the inside,
attach Mantel/Top (G) using Bolts (L)
and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
11. Using Phillips head screwdriver tighten all
Bolts alternating top and bottom, left and
right.
E-4
M
L
Support
Divider
N
F
Right
Side
Panel
M
N
N
N
N
Completed Assembly
N
N
T
N
M
N
L
G
M
L
Left
Side
Panel
E
N
L
N
N