MSI 970 GAMING Mode D'emploi page 44

▶ DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto] DRAM timings will be determined based on SPD (Serial Presence Detect)
of installed memory modules.
[Link] Allows user to configure the DRAM timing manually for all memory
channel.
[UnLink] Allows user to configure the DRAM timing manually for respective
memory channel.
▶ Advanced DRAM Configuration
Press <Enter> to enter the sub-menu. This sub-menu will be activated after setting [Link]
or [Unlink] in "DRAM Timing Mode". User can set the memory timing for each memory
channel. The system may become unstable or unbootable after changing memory tim-
ing. If it occurs, please clear the CMOS data and restore the default settings. (Refer to
the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to
load the default settings.
▶ HT Link Speed
This item allows you to set the Hyper-Transport Link speed. Setting to [Auto], the sys-
tem will detect the HT link speed automatically.
▶ Adjusted HT Link Frequency
It shows the adjusted HT Link frequency. Read-only.
▶ HT Link Control
Press <Enter> to enter the sub-menu.
▶ HT Incoming/ Outgoing Link Width
These items allow you to set the Hyper-Transport Link width. Setting to [Auto], the
system will detect the HT link width automatically.
▶ Adjust PCI-E Frequency (MHz)
Sets the PCI Express frequency.
▶ XXX Voltage [Auto] (optional)
Sets these voltages. If set to "Auto", BIOS will set these voltages automatically or you
can set it manually.
▶ Spread Spectrum [Disabled]
This function reduces the EMI (Electromagnetic Interference) generated by modulating
clock generator pulses.
[Enabled] Enables the spread spectrum function to reduce the EMI (Electromagnetic
Interference) problem.
[Disabled] Enhances the overclocking ability of CPU Base clock.
En-30