Sprintus TORANA Mode D'emploi page 33

CLEANING / MAINTENANCE
Remove and clean the squeegee
Empty the collecting tank
Drain, rinse or disinfect the collecting tank
Charge the battery
Check the amount of fluid in the batteries
Remove the brushes and check their wear. Make sure that no fo-
reign matter interferes with the movement or performance of the
cleaning equipment.
Visual inspection of the general condition of the machine
Make sure that the hoses or wires are not obstructed or blocked
Check the wear of the suction blades
Remove and clean the cleaning solution filter
General cleaning of the brush plate, the holder and the suction bar
Check the lifting and lowering movements of the suction bar
Lubricate the moving parts
Check the stop-cock of the cleaning solution.
Cleaning the hoses with descaling agent
Check floater
LpA 71,23
dB(A)
Acoustic pressure
Vibrations
79 dB(A)
LwA
K (uncertainty) ±1dB (A)
Acoustic power measured
0,26 m/s²on steering wheel
33
If After each
necessary use
X
X
X
X X
X
X
X
X
80 dB(A)
LwA
Acoustic power grantedt
Weekly Monthly
X
X
X
X
X
X
X
X