Assemble Grill - Coleman 9962 Serie Manuel D'assemblage, D'entretien Et D'utilisation

Assemble Grill

IMPORTANT: Remove all packing material prior to assembly/use.
During assembly, grill lid should be latched and grill should lie on carpet or cardboard.
■ Inspect and remove all components from package.
(Fig. 3) See carton for parts and hardware included with
your unit.
• Leg Assembly
• Leg Extensions
• Towing Handle
• Wheels
• Grease Cup
• Grate
• Grill with Fixed
Side Table
• Bolt, Rings & Nut
)
(Assembling Leg Assembly
• Bolt & Nut
(Leg / Grill Fixture)
• Bolts & Washers
(Wheels / Leg Assembly Fixture
Tools Needed for Assembly
• Crescent Wrenches
■ Assemble leg assembly first (Fig. 4 a). Assemble wheels
& leg extensions as shown below. (Fig. 4 b)
Note: (Fig. 4 b) Press the buttons on leg ends (outer pair)
and then push leg extensions until they lock into place.
Leg Assembly
Rings
Fig. 4 a
■ Put a blanket on a flat surface with strong support. Flip
grill upside down and place the grill on the blanket.
■ Unfold leg assembly, slide leg extensions into locking
brackets and adjust position of inner pair of legs so
the holes on leg ends are aligned with holes on fixture
bracket. Insert bolt through the holes and tighten with nut.
Bracket
)
Washer
Wheel
Button
Leg Extension
Nut
Fixture Bracket
Bolt
■ Fold leg assembly into stowed position, make sure that
legs and clips are engaged.
■ Rotate clockwise the leg locker into slot until secured.
Note: Anytime you stow the legs and move the grill,
make sure that you lock this leg locker, otherwise grill will
Fig. 3
flip over and be damaged.
Bolt
■ Grasp the handle on side
table and stand grill to
upright position.
Fig. 4 b
■ Insert towing handle into
leg assembly.
■ Press buttons on towing
handle and push in until
the buttons lock into
place. (Fig. 9)
NOTE: Plastic feet
should be facing away
from the grill.
Fig. 5
English - 5
Clip
Fig. 6
Fig. 7
Fig. 8
Plastic
Feet
Fig. 9