Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Store the tool in a dry, clean area out of reach of children.
During extended periods of storage, ensure that the tool is
protected against corrosion and rust.
Problem
−
Unit does not run
−
Slow running, noisy or hot blades
—
Bar and chain running hot and
smoking
—
Motor runs but chain is not rotating
STORAGE
TROUBLE SHOOTING
Possible Cause
−
Extension cord not connected to
the plug
−
Cord not connected to power
source
−
Trigger switch not fully operated
−
Chain brake is engaged
−
Dry, corroded blades
−
Blades or blade support bent
−
Bent or damaged teeth
−
Loose blade bolts
−
Check chain tension for
over-tight condition
−
Chain oil tank empty
−
Chain installed in wrong
direction
−
Chain tension too tight
−
Check guide bar and chain for
damage
Model CVP41810
At the end of the season, or if the tool is not being used for
longer than a month, wipe over all metal surfaces with an oil
impregnated cloth to protect them from corrosion or spray with
a fine coat of oil.
−
Check extension cord is fully connected to tool
−
Check extension cord is fully connected to a live receptacle
−
Check that safety lock of button is fully depressed prior to
moving trigger
−
Pull hand guard back toward front handle
−
Lubricate blades
−
Straighten blade or blade support
−
Straighten teeth
−
Tighten blade bolts
−
Adjust chain tension
−
Fill tank with chain oil
−
Reverse chain so that cutters face the right direction
−
Adjust chain tension
−
Replace damaged bar and chain with identical replacement
parts.
15
Possible Solution
Publicité
Table des Matières
