Installing/Removing The Mini-Bowl And Mini-Blade - KitchenAid KFP1642 Instructions

USINg YOUR ACCESSORIES

Installing/removing the mini-bowl and mini-blade

Place the mini-bowl inside the work
bowl, making sure the tab on the
1
mini-bowl lines up with the notch
in the work bowl.
Install the work bowl lid, aligning
3
the tabs and locking it into place.
Using the two finger grips lift the
5
mini-bowl up.
IMPORTANT: Discs and adapters must be removed before removing bowls.
Power shaft
Press down firmly on the mini-blade.
You will hear a click when it locks
2
into place.
Remove the work bowl lid. Grasp and
4
pull the mini-blade straight up.
Mini-blade
21