Additional Safety Warnings; Specific Warnings & Safety Rules - Arrow RT90P Mode D'emploi

SPECIFIC WARNINGS & SAFETY RULES

ADDITIONAL SAFETY WARNINGS

Always assume that the power tool contains
fasteners. Careless handling of the power tool can result
Do not actuate the tool unless the tool is placed
If the tool is not in
away from your target.
Ensure the trigger is in the off position and
air pressure when the fastener jams in the tool.
While removing a jammed fastener, the riveter may be
accidentally activated if the trigger is in the on position and
pressure has not been released.
Use caution while removing a jammed fastener.
The mechanism may be under compression and the fastener
may be forcefully discharged while attempting to free a
jammed condition.
WARNING: The brass components of this product contain
lead, a chemical known to the state of California to cause
birth defects or other reproductive harm. Wash hands after
handling.
SPECIFIC SAFETY RULES
1. Know your power tool. Read the operator's manual
carefully. Learn its applications and limitations, as well
tool. Following this rule may reduce the risk of electric
6
2. Do not attempt to alter the tool. Any unauthorized
is misuse, which could result in a hazardous condition
causing possible serious personal injury. Unauthorized parts
®
3. Use only original ARROW parts.
4. Use proper air compressor. Obey the manual for the
air compressor used to power this tool.
SAFETY INSTRUCTIONS FOR POWER TOOL
• Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more securely than
by hand.
• Attach the mandrel catcher to the rivet tool
Turn the slot in the Mandrel Catcher upward
to avoid spilling used rivet mandrels.
•
nails and other elements in your workpiece;
•
90 psi and 120 psi.
• In case of electrical or mechanical malfunction,
immediately switch off the tool.
•
tool only when original accessories are used.
•
age of 16 years.
• Do not expose tool to rain.
DEFINITION OF SYMBOLS USED ON TOOL
& FUNCTIONAL DESCRIPTION
Obey all safety messages that To avoid eye injury always
follow this symbol to avoid wear safety glasses when
possible injury or death. operating the tool.
Nose Piece
Nose Head
Oversized Trigger
Quick Connect
Air Coupler
To avoid loss of hearing,
always wear ear protection
when operating the tool.
Frame Cap Nut
Mandrel Catcher
7