Moving A Stored Frequency; Deleting A Stored Frequency; Deleting All Memory Contents Of A Page; Customizing Memory Pages - Eton YB550 Mode D'emploi

MOVING A STORED FREQUENCY

1. Turn on the radio.
2. Press/hold the M.Scan/Page button for about 3 seconds
and release it.
3. Use the + or – button to select the required memory
page.
4. Press/release the M.Scan/Page button twice.
5. Press/release the Mem./Edit button.
6. Within 5 seconds use the numeric keypad to enter the
memory preset number that you wish to store the station
into.
7. Within 5 seconds press/release the Mem./Edit button.

DELETING A STORED FREQUENCY

1. Press/release the M.Scan/Page button.
2. Use the + or – button to select the memory preset loca-
tion of the frequency that you wish to delete.
3. Press/hold the Mem./Edit button for about 2 seconds and
then release it. 'dEL' appears flashing in the display.
4. Within 2 seconds, press/release the Mem./Edit button.
36
Y B 5 5 0 P E
DELETING ALL MEMORY
CONTENTS OF A PAGE
1. Press/release the M.Scan/Page button.
2. Press/hold the Mem./Edit button for 4 seconds and then
release it. 'Del' (38) appears flashing in the display.
3. Within 2 seconds, press/release the Mem./Edit button.

CUSTOMIZING MEMORY PAGES

The number of memory pages can be changed from 8 to 4, 5,
or 20. While this changes the number of frequencies stored
per page, in all cases 200 total frequencies can be stored. To
see the details of these changes and to make these changes
please see the instructions titled SYSTEM SET CODE TABLE,
on Pages 41-42.
O P E R A T I O N M A N U A L
37