Setting The Speed; Fix Spindle - HOLZMANN MASCHINEN D 510F Manuel D'utilisation

15.2.2 Setting the speed

Off before conversion work machine and unplug the power cord!
By moving the belt in the headstock 3 speed ranges can be set.
In these areas, the speed after switching speed with the speed controller (12) is infinitely
variable.
 Remove the cover (A) and the side cover (B) open bottom left of the drive motor.
 The clamping lever (C) and turn the motor bracket (D) slightly.
 The belt can be connected to the pulley (E) below and above 1,2 or 3 is set to the appropriate
position.
 Push the correct insertion of the V-belt motor bracket (D) down and given a suitable belt
tension with the clamping lever (C) clamp.
 The side cover (B) and cover (A) Close and secure.
icon image

15.2.3 Fix spindle

With the locking bolt (A) the drive spindle can be fixed in 24
positions or at 30 ° scale on disc (B).
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
ATTENTION
OPERATION
28
D 510F