Publicité
FRONT BRAKE AND REAR BRAKE
5 - 21
2. Install:
Brake lever 1
G
Bolt (brake lever) 2
G
6 Nm (0.6 m · kg, 4.3 ft · lb)
Nut (brake lever) 3
G
6 Nm (0.6 m · kg, 4.3 ft · lb)
NOTE:
Apply the lithium soap base grease on the
brake lever sliding surface, bolt and contacting
surface of the master cylinder piston.
Rear master cylinder
1. Install:
Copper washer 1
G
Brake hose 2
G
Union bolt 3
G
30 Nm (3.0 m · kg, 22 ft · lb)
WARNING
Always use new copper washers.
CAUTION:
Install the brake hose so that its pipe por-
tion a directs as shown and lightly
touches the projection b on the master
cylinder.
2. Install:
Master cylinder 1
G
Bolt (master cylinder) 2
G
11 Nm (1.1 m · kg, 8.0 ft · lb)
3. Install:
Spring 1
G
Brake pedal 2
G
O-ring 3
New
G
Bolt (brake pedal) 4
G
26 Nm (2.6 m · kg, 19 ft · lb)
Clip 5
G
NOTE:
Apply the lithium soap base grease on the
G
bolt, O-ring and brake pedal bracket.
Install the clip with its stopper portion a fac-
G
ing inward.
CHAS
New
Publicité
Chapitres
