Contents
Declaration of conformity
Extent of delivery
Pull, crosscut and mitre saw KGSZ 305 N (preassembled
unit)
2 support arms
1 vice assembly
1 anti-tip device
1 dust bag
1 set carbon brushes
Tool
Operating manual
Assembly and operating instruction sheet
Warranty declaration
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
16
Symbols machine
2
Carefully read
operator's manual
16
before handling the
16
machine. Observe
17
instructions and
17
safety rules when
17
operating.
17
Wear dust mask.
17
19
Do not expose to
20
rain. Protect against
20
humidity.
21
22
23
24
This product
25
complies with
25
European
25
regulations
26
specifically
applicable to it.
Electrical devices do not go into the domestic rubbish.
Give devices, accessories and packaging to an
ecofriendly recycling.
According to the European Directive 2002/96/EC on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a facility
for an environmentally compatible recycling.
Attention! Laser radiation. Do not look into the beam.
Symbols Operating instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling. Not
observing this instruction can lead to faults in the
machine.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Please refer to the attached assembly and
operating instruction sheet for references to
figure numbers in the text.
...
Wear eye and ear
protection.
Risk of injuries of
fingers and hands
by the saw blade.
Shut off engine
and remove power
cord before
performing
cleaning,
maintenance or
repair work.
Machine of the
protection class II
(double insulated)