Tommee Tippee Light and Sound Sleep Aids Mode D'emploi page 5

About the CrySensor
The CrySensor allows your light and sound sleep aid to listen out for noise and respond by playing the
sound or lullaby you last chose to help settle your child back to sleep. Your light and sound sleep aid
can hear all the noises in a room but is programmed to respond to crying or sharp sounds that may
disturb your little one's sleep. If there's a rapid movement in the room, the noise may be enough to
activate it.
Place your light and sound sleep aid near your child, but never in the cot or other sleeping space
with them.
CrySensor
is listening
How to turn the CrySensor on and off
Select how you want to use the CrySensor using the function switch on the battery pack.
Off
Turns off all functions
CrySensor on
The CrySensor remains active and listens for your baby's cry all night.
When your child stirs, it will play your choice of a sound or lullaby for 20 minutes,
then go back to listening with the CrySensor.
CrySensor on a 3 hour auto shut-off
The CrySensor remains active and listens for your baby's cry for 3 hours, then
automatically switches off.
When your child stirs, it will play your choice of a sound or lullaby for 20 minutes,
then go back to listening with the CrySensor. If the CrySensor doesn't detect any
sounds for 3 hours, then it will automatically switch off.
On with the CrySensor off
You can still play sounds or lullabies and use the light, but the CrySensor is not
active and listening.
If your child is having a difficult night, it may continuously play the soothing sound from one 20-minute
play time to the next until your little one is settled.
8
3 hours
FAQs FAQs
Q: What age can the light and sound sleep aid be used from?
They are suitable from birth to soothe a newborn and can be used with your child as they grow. Having
buttons in arms and feet make it perfect for a toddler to work themselves.
Q: How do I check that the CrySensor is working?
To check the CrySensor, make sure you have the function switch in the correct position then clap next
to it to hear your chosen sound or lullaby.
Q: Where should I put the light and sound sleep aid?
You should place it near your baby so it can listen in CrySensor mode and so your baby can hear and
see them. Use the loop to attach it to your baby's cot out of reach of your baby or stand it on nearby
furniture. If you use the loop to attach to the cot, make sure it is hanging outside the cot so that if it
falls, it will fall outside the cot.
Never place a toy or other object on the mattress inside a sleeping baby's cot.
Q: What sounds can my light and sound sleep aid hear?
The CrySensor works best when it is less than 1 metre from your child. When noise levels within 1 metre
reach 50dBA, it will play your chosen sound.
Q: How do I care for my light and sound sleep aid?
Because of the electrical components inside, this product is surface wash only. Please do not put it in
a washing machine or tumble dryer. Just wipe it over with a damp cloth. Do not use any chemicals as
they may affect fabrics or transfer to your child's environment.
Q: What if my light and sound sleep aid does not play sound or light up?
First check the switch on the battery pack to make sure it is turned on. If it still doesn't work, check it
is fully charged by plugging into the charging cable (Note: Your light and sound aid will not work while
the battery is charging). The indicator light on the battery pack will glow red for charging and blue for
fully charged. If you're still having problems, please contact us (tommeetippee.com).
9