Vertical Steaming; Auto Shut Off Function - Taurus SlidingPerfect2400 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
clay or if it is "hard" (containing lime or
magnesium).
Remove the tank
Fill the compartment with cold water through its
filling port.
Fill the deposit taking care to observe the MAX
level.
Pour in water using the measuring cup and
funnel supplied.
Close the diposit
USE
Extend the cable completely before plugging
it in.
Select the desired temperature adjustment
knob (7)
Connect the appliance to the mains.
Press and hold the power button (5) to start
using. You will see a blue light start flashing.
NOTE: The first use of the steam iron will delay
the production of steam due to some air in
the steam hose, but don't worry about it will
be normal after about 30 secondsWhen you
will heart a beep and the blue light will stop
flashihg. The product is ready to use it.
Press and hold the steam button (6) to enter
the continuous steaming state and start
ironing.
You can use the steam iron vertically to remove
the wrinkles from hanging clothes.
Stand the iron up, press the steam switch and
touch the clothes with the soleplate, then move
the iron up and down.
To get the best ironing effect, please iron a
few times without steam at the end after using
steam ironing.
Each time the steam switch is pressed, the
pump is activated. There will be a slight
creaking sound, which is normal. When there
is no water in the water tank, the pumping
sound will be louder. Please add water to the
water tank. When ironing is no longer needed,
please do not turn off the power immediately.
You must wait until the soleplate of the iron
no longer releases steam before turning off
the power, otherwise the soleplate of the iron
will have steam or water droplets sprayed out
when the power is turned on next time.
If garment has various kinds of fibres, select
the temperature for the fibre that requires the
lowest temperature. (For example, select the
temperature for polyester for an article made
out of 60% polyester and 40% cotton).
FABRIC GUIDE

VERTICAL STEAMING:

It is possible to iron hanging curtains, items of
clothing on his hanger, etc. To do so, follow the
instructions:
Select the maximum temperature.
Pass the iron from top to bottom by pressing
the steam control with the material.
Important: for cotton and linen, its
recommended to put the iron base in contact
with the material. For other more delicated
fibres, it's recommended to keep the iron base
at some centimetres of distance.

AUTO SHUT OFF FUNCTION

If you do not operate the steam switch for 10
minutes it will enter the sleep state, and you
can activate it by operating the steam switch

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ssd2401

Table des Matières