Installation Instructions - Victron energy VGR Mode D'emploi

2.2 Installation instructions

2.2.1 Mounting the modem
Before mounting the modem, write down the serial number in the provided space on the back
of this manual; it will be required later. The serial number is the 15-digit number underneath
the barcode, located on the underside of the modem.
2.2.2 Inserting the SIM
1. With the SIM oriented as shown on the right, push the SIM
into the SIM slot on the modem (A), until it clicks.
2. Slide the SIM lock to the right.
2.2.3 Removing the SIM
1. Slide the SIM lock to the left.
2. Push the SIM into the slot until it clicks.
3. Release the SIM and it will be partially ejected from the SIM slot.
4. Remove the SIM from the slot.
2.2.4 Connecting to a VE.Bus system
1. Connect the 16-way plug of the Y cable (E) to the socket on the modem (A).
2. Connect the male DB9 plug of (E) to the female DB9 socket of the MK2 (G).
3. Connect the RJ45 socket of (G) to your VE.Bus system.
2.2.5 Connecting to a BMV-602
1. Connect the male DB15 plug of (VGR900100000- Victron Global Remote to BMV602
Connection Kit) to the modem (A).
2. Connect the other side of (VGR900100000- Victron Global Remote to BMV602 Connection Kit)
to the female DB9 plug of the BMV-602 data cable.
3. Connect the other end of the BMV-602 data cable to the BMV-602.
3