Lehmannaudio Black Cube Statement Mode D'emploi page 20

38 Black Cube Statement
Functional description
EN
Output
3 4 5
3 | Output jacks (OUT)
RIAA filtered high-level output. Connect the cables that either lead to the input
of a downstream high-level pre-amplifier (high-level inputs are labelled 'Line',
'AUX', 'CD', 'Tuner' etc.) or directly to a power amplifier with volume control.
Here too, please be sure to connect the cables to the correct channels. When
the device is viewed from above, the respective matching channels are arranged
in a line.
ATTENTION!
Never connect the output of the Black Cube Statement to the
phono input of another device. This could damage the phono
stage or speakers.
4 | Operating mode display (LED)
When the LED is lit up, the Black Cube Statement is operational. The device
does not have a power switch.
5 | External power supply input
The included external power supply or an equivalent 24 V DC power supply is
connected here. Do not connect or disconnect the power supply cable during
operation.
Black Cube Statement 39
EN