Hama Cube Mode D'emploi page 7

Note – Cancellation of search process
• A search for a DCF signal is nonetheless carried out daily (between 1 am and 5 am) in
order to update the time and date. If the signal is received successfully, the time and
date are automatically overwritten.
Note – Time settings
• If, during initial setup of the device, no DCF radio signal is received within the rst few
minutes, the search is aborted. The radio icon (6) will go out.
• If there are reception problems, we recommend leaving the clock to sit overnight, since
interference is generally less at night.
• In the meantime, you can start a manual search for the DCF radio signal at another
location or you can manually set the time and date.
• The clock automatically continues to search for the DCF signal on a daily basis (at 1
am and 5 am). If the signal is received successfully, the manually set time and date
are overwritten.
Press and hold the +/RCC button (10) for approx. 3 seconds to start a manual search for
the DCF radio signal.
Note – Manual search
• The manual search is automatically aborted after 7 minutes.
• Using the RCC button (10) frequently will drain the battery. We recommend only using
this function to seek out an optimal location for the device.
Note – Summer time
• The clock automatically switches to summer time. DST (6) appears on the display as
long as summer time is activated.
5