Thermostat Function; Timer Function; Memory Function - kayami RM 2000-D Mode D'emploi

• T o select the HIGH power option press the setting
lights will light up to indicate 'high power'.
• LOW power is 1200W and HIGH power is 2000W.

Thermostat Function

• Press the
it will return to display the current room temperature.
• Press the setting
tween the range of 5°C to 36°C.
• Once the desired
function and return to normal operation. The current room
displayed. T o view the set

Timer Function

• T o set the number of hours the heater will run before
press the timer select button (
to add 0.5 hours or reduce 0.5 hours between the range of 0-18 hours).
• Once the desired time is set wait 5 seconds, the heater will exit the timer function
and return to normal operation. T o view the time set at any time, press the (
button.

Memory Function

• When the heater is switched to STANDBY the last
retained in the heater's memory the next time the heater is switched ON, unless
the heater switched OFF using the power switch.
Note: The timer setting is not retained.
Remote
• The remote control duplicates all the controls that are on the control panel.
Please refer to the above
select button ( ), the current
buttons, or to add 0.5°C or reduce 0.5°C be-
is set wait 5 seconds, the heater will exit the
at any time, press the ( ) button.
) then press the setting
for operation.
19
button Both blue
setting will flash then
will be
switching off
buttons or
)
will be