Troubleshooting; Chart Of Medical Device Symbols Used; Chart Of Electrical Symbols Used - Sunoptic Technologies LLS-2000 Manuel D'utilisation

10.

TROUBLESHOOTING

Problem
The power indicator (refer to
4.1) is not lit.
The power indicator is lit, but
lamp will not ignite.
11.

CHART OF MEDICAL DEVICE SYMBOLS USED

Caution: Federal law restricts this device to sale by or on the
order of a licensed healthcare practitioner
12.

CHART OF ELECTRICAL SYMBOLS USED

Product labeling
ratings, manufacturer name, Regulatory marks, and FDA "Rx Only" symbol.
LIT168 SUNOPTIC TECHNOLOGIES
(English)
Solution
A. Check that the AC power cord is properly
connected.
B. Check the unit fuses. If necessary, replace.
Turn intensity control knob clockwise to increase light
output intensity
Manufacturer
Date of manufacture (YYYYMM or YYYY)
"Authorized Representative" in the
European Community
Caution, consult
documents
Consult Instructions for Use
CE mark
AC Current
Equipotentiality
Power on
Power off
Type BF
Protective Earth (Ground)
Product label containing model number, serial number, electrical
®
accompanying
Rev. A
Date of Revision:08/02/16
Page 12 of 60