Celestron 44430 Manuel D'instructions page 7

c , M
are aIntenance
Your Celestron accessory is a precision optical instrument and
should be treated with care at all times. Follow these care and
• When you are done using your microscope, remove any specimens left on the stage.
• Turn off the illuminator switch.
• Turn off the LCD monitor.
• Unplug the power cord(s).
• Remove the LCD Monitor and Digital Camera from your microscope and place them back in the case.
• Store the product in a dry and clean place.
• When moving your microscope, make sure the LCD Monitor is in the upright position and cannot accidentally fall.
• Clean the outside surfaces with a moist cloth.
• Always unplug any cords before cleaning.
• Never clean optical surfaces with cloth or paper towels as they can scratch optical surfaces easily.
• Blow off dust with a camel's hair brush or an air blower from optical surfaces.
• To clean fingerprints off of optical surfaces, use a lens cleaning agent and lens tissue available at most photo outlets
and when cleaning do not rub in circles as this may cause sleeks or scratches to occur.
• Never disassemble or clean internal optical surfaces. This should be done by qualified technicians at the factory
or other authorized repair facilities.
• When handling glass specimen slides, use care as the edges can be sharp.
Y
our
p
LeaSe See the
, w
and arrantY
c
eLeStron acceSSorY haS a two Year LIMIted warrantY
c
eLeStron webSIte for detaILed InforMatIon on aLL
c
eLeStron acceSSorIeS at www
maintenance suggestions and your microscope will need very
little maintenance throughout its lifetime.
. .
ceLeStron coM
7
.
.