JVD Shield Mode D'emploi page 20

SLEEP
Your Shield has a SLEEP mode. This means
no purification cycle is being performed. In
SLEEP mode, the appliance is in its energy-
GB
SLEEP
LOCK
In order to protect your Shield from changes
made by another person, you can lock
the access to your appliance even when a
LOCK
Even when the LOCK mode is on, you can visually identify the current purification cycle by what the
HOME button is doing.
SITUATIONS
• 24/7 MODE
The Shield was designed using a JVD
technology. CONTINUOUS mode provides
optimal purification for a period of 8 hours.
However, in the event of permanent nuisances
(areas with high sanitary restrictions,
20
Activating
the mode
Automatic standby
Stopping SLEEP
mode
Activating
the mode
Unlocking
Changing (slow glow/fade)
Changing (fast glow/fade)
® patented
saver mode, the screen is off and only the
HOME button is visible. The SLEEP mode can
only be accessed from the HOME screen.
Press HOME when you are on
the HOME screen. This means no
purification cycle is being performed.
After 15 minutes of being idle,
the Shield will automatically switch
Press HOME. This takes you back
to the HOME screen. The Shield will
then await further instructions.
purification cycle is in progress. The LOCK
mode locks the entire screen.
Regardless of which screen you are
currently on, press HOME for at least
Press for
3 seconds. This locks the Shield.
3 seconds
Press HOME for at least 3 seconds.
This unlocks the Shield. It will take
Press for
you back to the original screen.
3 seconds
Steady
persistent odours, ongoing high use area,
etc.), you can programme the Shield to
operate 24/7. The CONTINUOUS button will
glow steadily.
to SLEEP mode.
No purification cycle
in progress
CONTINUOUS mode
in progress
BOOST mode in progress