How To Use; Getting Started - Black & Decker BL1350DPC-P Guide D'utilisation Et D'entretien

HOW TO U S E
This product is for household use only.
G E T T I NG STARTE D
• Remove all packing material, any stickers, and the plastic band around
the power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/blackanddecker to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
B L E N D I NG JAR ASS E MB LY
1. Turn blending jar upside down and place flat on
counter top or work surface.
2. Place the blade assembly in bottom opening of the jar
with blades down. (A)
Caution: Blades are sharp. Handle carefully.
3. Place the jar base onto the blending jar and rotate
clockwise until tight. It is important to tighten to avoid
leaking while blending
4. Turn assembled jar right side up.
5. Place the dual-opening lid on blender jar.
6. Uncoil power cord from storage area under the blender
base.
7. Place the jar assembly on blender base (B) and twist
clockwise to lock.
8. Blender is now ready for use.
I N STA L LI NG I N FUS E R I NTO
B L E N D I NG JAR
1. Put together Blending Jar assembly as above.
2. Place the infuser filter all the way down into the base
of the jar, fitting together the slots on the bottom rim
of the filter with the ridges on the inside bottom of the
blending jar. (C)
3. Place the dual-opening lid on blender jar.
4. Open the Ingredient/Tamper Slot and insert the tamper. (D)
5. Blender with infuser is now ready for use.
4
C
D