Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Kristallo Series
Art. KRV86-KRV88
PROGRAMMING OSD MENU
When the system is in stand-by, keep pressed the button
until the monitor switches on showing the screen to the left.
The first programming option is the date & time (Fig. 4):
• change the values by the
• use buttons
and
set (day, month, year, hours and minutes);
• confirm the setting by the
ton when the field minutes is selected. The system goes
to next programming step.
The second programming option is the privacy duration
(Fig. 5) (from 0 to 20 hours):
• adjust the value by the buttons
duration unlimited, the service is disabled by pressing
again the button
);
• confirm the value by the
to next programming option.
Proceed in the same way for the other programming op-
tions: call tone volume (3 level, Fig. 6), melody (9 op-
tions, Fig. 7) and number of rings (for 1 to 9, Fig. 8).
Once selected "EXIT" press
return to edit programming options.
Note: from any of the two OSD menu's, if the video-
phone switches off because of the timeout, the con-
trols and the programmings are not stored.
VIDEOPHONE ADDRESS – SW1.1..7
The table below shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, multi-
ply each digit for the relevant decimal weight then sum values obtained to get the address: E.g. as highlighted
in the table OFF, ON, OFF, OFF, ON, OFF, ON in binary is equal to 0100101 then multiplying each digit for the
relevant decimal weight you obtain the address that is 37.
SWITCHES STATUS
7
6
5
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
ON
OFF
Note
The maximum number of units allowed is 100 but the address of each unit can be a value between 1 and 99.
INTERCOMMUNICATION MODE – SW3.1
This switch establishes the intercommunication mode: in OFF position (default) intercommunication is between units
in the same apartment (same addresses but different extension); in ON position the intercommunication is between
SW3.1
units in different apartments (different addresses).
On installations where there are more than one intercom/videophone in the same apartment and intercommunication between dif-
ferent apartments is required, only one intercom/videophone may be set with this function (SW3.1=ON, SW3.2=OFF, SW3.3=OFF).
The other intercom/videophones in the apartment must be set for local intercommunication with extension addresses "2-4" (slaves).
From the intercom/videophone set for intercommunication with other apartments it will not be possible to intercommunicate with-
in the apartment but slave extensions 2-4 will be able to intercommunicate with each other within the apartment.
Art. KRV88-KRV86 - Installation instructions
3.5" Hands free videomonitor for VX2300 digital system
and
buttons;
to move between the fields to
button or the
and
(0 = privacy
or
. The system jump
to exit or button
4
3
2
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
ON
OFF
ON
OFF
OFF
OFF
ON
OFF
OFF
OFF
ON
but-
EXIT
1 5 / 1 2 / 1 1
Fig. 4
EXIT
to
Fig. 6
EXIT
R I N G S 6
Fig. 8
BINARY CODE - DECIMAL WEIGHT
1
64
32
16
0
0
0
0
ON
0
0
0
0
ON
0
1
ON
1
1
- 3 -
EXIT
0 9 : 2 3
EXIT
8
4
2
0
0
0
0
0
0
0
1
0
0
0
1
0
0
1
0
0
0
1
0
0
0
0
1
0 1 . 5 h
Fig. 5
M E L O D Y 1
Fig. 7
ON
1 2 3 4 5 6 7
8
SW1.1..7
ADDRESS
1
1
1
0
2
1
3
0
4
1
37
1
99
66250903 - V4.4 - 15/03/22
Publicité
Table des Matières
