Operation; Saving Energy - Dometic BORDBAR AS25 Notice D'utilisation

SinePower
6

Operation

!
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
!
CAUTION!
Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE!
• Ensure that the objects placed in the cooler are suitable for cooling
to the selected temperature.
• Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze and can therefore
destroy glass containers.
• Ensure that your cooler is well ventilated so that any heat created can
dissipate. Otherwise proper functioning cannot be ensured. It is
especially important not to cover the air vents.
• Risk of spillage. Lift the cooler by the handle, not by the shoulder
strap.
I
NOTE
• Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 13).
• If the handle is folded back of if the cooler is being carried, the lid is
locked. You can only open the lid when the handle is folded for-
wards.
6.1

Saving energy

• Choose a well ventilated location which is protected from direct sunlight.
• If you want to set an increased energy efficiency and a limited cooling capacity for
the cooling device, use the device's ECO mode.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
EN
Operation
11