Briggs & Stratton 040375-02 Manuel De L'utilisation page 17

General Set Up Screen
For general set up, press and hold the left arrow and right arrow
NOTE Date and Time were set at the factory and stored in the control panel memory. The Exercise Cycle was also
set at the factory. The default exercise cycle occurs on Tuesdays, at 2:00 P.M. Central Standard Time. To update or
change these settings, follow the steps below.
SET DATE
or
SET TIME
or
SET EXERCISE
CYCLE
EVENT LOG
IF DURING PROGRAMMING NO BUTTONS ARE PRESSED FOR 30 SECONDS,
THE CONTROL PANEL WILL AUTOMATICALLY EXIT THE PROGRAM MODE.
YEAR
OK
FLASHING
or
HOURS
OK
FLASHING
or
OFF
or
DAY OF WEEK
OK
FLASHING
or
Display will scroll last service code event, date, time,
OK
and ambient temperature of when the event occurred.
for 3 seconds. Follow the prompts as outlined below.
MONTH
OK
FLASHING
or
MINUTES
OK
FLASHING
or
If set to OFF, display will read:
EXERCISE CYCLE OFF
HOURS
OK
FLASHING
or
DAY##
OK
FLASHING
or
AM/PM
OK
FLASHING
or
MINUTES
OK OK
FLASHING
or
OK
OK
OK
or
AM/PM
OK
FLASHING
or
or
OK
17