Briggs & Stratton 040375-02 Manuel De L'utilisation page 16

Menu
The following chart shows the icons for the buttons that control the system control panel.
MENU
ESCAPE (EXIT)
RIGHT ARROW
LEFT ARROW
MANUAL MODE
OFF
AUTOMATIC MODE
The following chart describes key sequences for accessing different programming modes:
16
ENTER THE MENU (VIEW SETTINGS)
PRESS TO CONFIRM SELECTION WHEN PROGRAMMING.
RETURN TO LAST MENU ITEM
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
USED TO MANUALLY START THE GENERATOR. PRESS AND HOLD
BUTTON TO START THE GENERATOR.
TURNS OFF RUNNING GENERATOR, PREVENTS UNIT FROM STARTING,
AND RESETS ANY DETECTED SERVICE CODES.
NORMAL OPERATING POSITION. PRESS AND HOLD BUTTON TO PUT UNIT
INTO AUTOMATIC MODE. IF A UTILITY POWER OUTAGE IS SENSED, THE
SYSTEM WILL START THE GENERATOR. WHEN UTILITY POWER IS
RESTORED, AUTO LETS THE ENGINE STABILIZE INTERNAL
TEMPERATURES, SHUTS OFF THE GENERATOR, AND WAITS FOR THE
NEXT UTILITY POWER OUTAGE.
PRESS AND HOLD [ARROW LEFT AND ARROW
GENERAL
RIGHT] FOR THREE SECONDS TO ENTER THE
SET-UP
PROGRAM MODE.
PRESS AND HOLD [ARROW LEFT, ARROW
ADVANCED
RIGHT AND ESC] FOR THREE SECONDS TO
SETTINGS
ENTER THE ADVANCED SETTINGS MODE.
PRESS AND HOLD [MENU AND ESC] FOR
WIRELESS
THREE SECONDS TO ENTER THE WIRELESS
LINK MODE
LINKING MODE.